Bitlogix Technology Blog

In our latest NetControl 2.5 universal projector control software release we improved support for SNMP network projectors and added three more SMART Board projector models. The SMART Board UF75, UF65 and UX60 projector drivers within NetControl provide all important control functions such as power on/off, input switching, AV mute, low/high lamp mode.

NetControl also records lamp hours and filter hours for the UF75, UF65 and UX60 models and sends email notifications to administrators or AV technicians.

NetControl 2.5 helps customers save projector lamp life by using NetControl’s powerful event scheduler. Power on/off times can be scheduled for any number of SMART Board Projectors. Save money, staff time, and stay in control of your projector inventory.

Please checkout and test the new SMART Board projector functions within NetControl 2.5.

The ultra-short-throw multimedia projector models Sanyo PDG-DXL2000 and PDG-DWL2500 are added to the NetControl 2.5 driver database. Both projectors were designed for classroom use and are equipped with a RJ45 network port for projector control. No extra control system hardware is needed to control the both models with NetControl.

NetControl is the perfect solution to control and manage large numbers of network projector in a LAN. NetControl is 100% software-based!

Our latest update release of the software-based control system software NetControl 2.5 supports additional ViewSonic projector models. All of the new ViewSonic projector models are equipped with a network port and can be controlled and managed over a computer network with NetControl 2.5. No complex and expensive hardware is needed!

VIEWSONIC PJD6223
VIEWSONIC PJD6253
VIEWSONIC PJD6553w
VIEWSONIC Pro8500

Bitlogix released today a new NetControl software update. Beside software improvements and control enhancements we added the following Casio PJLink network projectors to the NetControl 2.1 update:

CASIO XJ-H1650
CASIO XJ-M145
CASIO XJ-M155
CASIO XJ-M245
CASIO XJ-M255
CASIO XJ-ST145
CASIO XJ-ST155

With the latest NetControl 2.1 software update NetControl end users can control over 914 different projector and flat panel display models from over 29 different manufacturers. This makes NetControl the leading projector control software solution in its class. All NetControl 2.0 users with a current support agreement receive this update for free. All users with older NetControl versions can easily upgrade to NetControl 2.1 for an upgrade fee.

Our development team added support for

Eiki LC-XL100
Eiki LC-XL200
Eiki LC-XL100L
Eiki LC-XL200L

to our latest NetControl 2.0 software RC1 release. All projector models do support the PJLink protocol over a LAN. No extra control hardware is required to control the Eiki projectors over the network. NetControl makes it easy to setup PJLink projectors from many different manufacturers. Please check our supported device list for further details.

NetControl is the universal projector control software to control and manage projectors from different projector manufacturers. Flat Panel Displays are also supported.

The latest software release of NetControl 2.0 adds support for new Sanyo network projector models. All four models support the universal PJLink protocol.

Sanyo PLC-XM100
Sanyo PLC-XM150
Sanyo PLC-XM100L
Sanyo PLC-XM150L

The PJLink protocol enables the direct connection and control of the network projector over a LAN without any additional control hardware. Many Bitlogix NetControl customers switch to PJLink protocol enabled projectors to avoid excessive cost of third party control system hardware. The new NetControl 2.0 projector control and management software is today the most cost effective solution for projector control over the data network.

We finally installed the Bitlogix Technology Blog. This blog is open to all Bitlogix staff members to publish news, ideas and interesting developments. Please use it often and enjoy reading. Comments are also very welcome.